|
Chassis 2.5mm Graphite
#301100
High-quality CNC-machined chassis made from 2.5mm, highest-quality woven graphite.
|
|
|
6-Cell Chassis - Graphite
#301110
New CNC-machined graphite 6-cell chassis with the batteries either on the left side or right side. This chassis layout enables you to either use the various placements almost as on the standard chassis, but also to place all 6 cells along the left or right side.
|
|
|
eXtra Rigid Chassis (XRC) - Graphite 3.5mm
#301111
Use the ultimate chassis that top Team XRAY drivers Josh Cyrul, Ralph Burch, Jr. and Alex Lopez used to win their US National titles. Turn your T1 into the most ultimate racing machine.
|
|
|
Composite Chassis
#301117
CAD-designed ultra-rigid composite chassis is standard chassis for T1R Raycer, but may be used on T1 or T1 EVO2. Molded from tough specially-formulated composite, designed to handle the most extreme conditions and serious impacts. Innovative Inline-flow Cooling System™ cools batteries and motor, and allows for bottom mounting of chassis weights for ultra-low CG.
|
|
|
Upper Deck - Wide
#301163
Wide upper deck is made of high-quality CNC-machined graphite. Wider and stiffer than stock upper decks on T1 Evo2 and T1 Factory Kit.
|
|
|
Ultra Flexible Top Deck
#301170
This option part makes the top deck and whole car very stiff in the axis direction of transmission and stiff at any serious crash, but makes the chassis with suspension flex when needed. By letting the chassis twist, the car can get more grip without making the suspension any softer (and increasing body roll). The car is more calm and is not so aggressive therefore it has feeling it is more easy to drive.
|
|
|
Flexible Top Deck - Graphite
#301180
The new 301180 Flexible Top Deck provides another tuning option to adjust the chassis stiffness of your XRAY T1. Made of CNC-machined top quality graphite, this flexible top deck provides medium stiffness, stiffer than the 301170 Ultra Flexible Top Deck, but softer than the standard stock top deck.
|
|
|
Suspension Adjustable Bulkheads + Tool
#302000
Alu Complete set of 4 alu suspension adjustable bulkheads, 4 eccentric nylon hubs, new plastic covers for ball-bearings. Purchasing this complete kit you get FREE new ball-bearings 6x10x3 and 5x9x3 with blue polyamid covers for easy servicing + you get a FREE duraluminum hub insertion/removal tool available only in this complete set.
|
|
|
Nylon Hub For Ball-Bearing (4)
#302012
New molded special nylon hubs for ball-bearings 10x15x4 that are pressed into both front and rear bulkheads. These new nylon hubs have been developed to eliminate the small manufacturing tolerances of the ball-bearings. The nylon hubs provide the same performance as the previous duraluminum one.
|
|
|
Eccentric Nylon Hub For Bulkhead + Covers (4+2)
#302070
Set of nylon hubs includes: four eccentric hubs for differential ball-bearings, two non-eccentric hubs for layshaft ball-bearings. Eccentric hubs allow for tightening and loosening of front and rear drive belts.
|
|
|
High-Speed Ball-Bearing 5x9x3 Blue Covered (2)
#309035
New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain that is much more resilient under loads.
|
|
|
High-Speed Ball-Bearing 6x10x3 Blue Covered (2)
#309045
New high-speed ball-bearings manufactured specially for XRAY. Top-quality professional ball-bearings for a super-free, super-smooth drivetrain that is much more resilient under loads.
|
|
ID |
Product Name |
Released |
904306 |
|
Jul. 30, 2004 |
904308 |
|
Jul. 30, 2004 |
930509 |
|
Jul. 30, 2004 |
930610 |
|
Jul. 30, 2004 |
940509 |
|
Jul. 30, 2004 |
940610 |
|
Jul. 30, 2004 |
960030 |
|
Jul. 30, 2004 |
301111 |
|
Jul. 23, 2004 |
301163 |
|
Jul. 23, 2004 |
302001 |
|
Jun. 15, 2004 |
301117 |
|
Mar. 24, 2003 |
301167 |
|
Mar. 24, 2003 |
301161 |
|
Jul. 04, 2002 |
302015 |
|
Jul. 04, 2002 |
302025 |
|
Jul. 04, 2002 |
302070 |
|
Jul. 04, 2002 |
303015 |
|
Jul. 04, 2002 |
303025 |
|
Jul. 04, 2002 |
301180 |
|
Jun. 20, 2002 |
309035 |
|
May 23, 2002 |
| |
|
|